Konica-minolta bizhub 184 Manual de usuario descargar pdf (Pagina 33)

Basic operations

3-4 bizhub 184/164

3.2

Using this machine Chapter 3

Loading paper into the Bypass Tray

0 The Bypass Tray is an option.

0 Make sure that the original and the loaded paper have the same orientation. Otherwise, some parts of

the image may be lost.

1 Open the Bypass Tray and slide the Lateral Guides to provide

more space between them.

% To load large-sized paper, pull out the Tray Extension.

% 1. Paper Take-Up Roller

NOTICE

Be careful not to touch the Paper Take-Up Roller.

2 With the side to be printed on (the side facing up when the package was unwrapped) facing down, in-

sert the paper as far as possible into the feed slot.

% The image will be printed on the surface of the paper facing down.

% Do not load so many sheets of paper that the top of the stack is higher than the , mark.

% If paper is curled, flatten it before loading it.

% Allows you to load up to 100 sheets of plain paper, or 20 sheets of card in the paper tray.

3 Slide the Lateral Guides to fit the size of paper being loaded.

The Bypass Paper Setting screen appears.

% Push the Lateral Guides firmly up against the edges of the pa-

per.

4 Specify the paper size and paper type for the Bypass Tray.

% To specify from the Menu function, press the Menu/Select key ö [COPY JOB SETTING] ö [BY-

PASS PAPER].

Settings

[SIZE] Select a paper size.

For details on how to configure a custom size, refer to page 3-5.

[TYPE] Select a paper type.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 123 124

Sin comentarios

Konica-minolta bizhub 184 Manual de usuario Pagina 33